Specifications Overview:

 

Print Method: HDP Dye-Sublimation/ Resin Thermal Transfer

Resolution:  300dpi (11.8 dots/ mm)

Colors: Up to 16.7 million/ 256 shades per pixel

 

Print Ribbon Options:

• Full-color, YMC*, 750 prints

• Full-color with resin black, YMCK*, 500 prints

• Full-color with two resin black panels, YMCKK*, 500 prints

• Full-color with resin black and heat seal panel for difficult-to-print surfaces, YMCKH*, 500 prints

• Full-color with resin black and inhibit panel for signature or other non-printing areas, YMCKI*, 500 prints

• Full-color with fluorescing and resin black, YMCFK*, 500 prints

• Resin black, K, 3000 prints

 

HDP Film Options:

• Clear (1,500 prints) • Standard Holographic (500 print) • Custom Holographic, special order

  (500 print)

 

Overlaminate Options:

• Thermal Transfer Overlaminate, 25mil thick, 500 prints

• PolyGuard® Overlaminate, 1.0 mil and 6mil thick, 250 prints (PolyGuard available in a CR-80 patch size) All overlaminates available in clear, standard holographic design or custom holographic design

 

Print Speed:**

Batch Mode:

•26 seconds per card/ 138 cards per hour (YMC with transfer)*

•32 seconds per card/ 113 cards per hour (YMCK with transfer)*

•47 seconds per card/ 77 cards per hour (YMCKK with transfer)*

•37 seconds per card/ 97 cards per hour (YMCK with transfer and dual-sided, simultaneous

  lamination)*

•55 seconds per card/ 65 cards per hour (YMCKK with transfer and dual-sided, simultaneous 

  lamination)*

 

Accepted Standard Card Sizes:

• CR-80 (3.370"L x 2.125"W/ 85.6mmL x 54mmW)

 

Print Area:

• Over-the-edge on CR-80 cards

 

Accepted Card Thickness:

• Print only: .030" (30mil) to .050" (50mil) / .762mm to 1.27mm

• Print/ Lamination: .030' (30mil) to .050" (50mil) / .762mm to 1.27mm

 

Accepted Card Types:

ABS, Laminated PVC, PET, PETG, proximity, smart and mag stripe cards, optical memory cards

Note: ABS and PVC cards are not recommended for use in the HDP5000 Lamination Module.***

 

Input Card Cartridge Capacity:  100 cards (.030"/ .762mm)

Output Hopper Card Capacity: 200 cards (.030"/ .762mm)

Card Cleaning: Replaceable cleaning roller (included with each print ribbon)

Memory: 16MB RAM

Display: User-friendly, SmartScreen™ LCD Control Panel

 

Software Drivers:

Windows® 2000/ XP/ Server 2003/ Vista(32bit); Mac OS X v10.4/ v10.5; and Lunux****

 

Single Wire USB 2.0 Encoding Options:

• ISO Magnetic Stripe Encoding, dual high- and low-coercivity, Tracks 1, 2 and 3

• Contactless Smart Card Encoder (HID iCLASS and MIFARE)

• Contact Smart Card Encoder reads from and writes to all ISO7816-1/2/3/4 memory and

   microprocessor smart cards (T=0, T=1) as well as synchronous cards

• Prox Card Reader (HID read-only)

 

Interface:  USB 2.0 (high speed) and Ethernet with internal print server

 

System Requirements:

based PC or compatible, Windows 2000, Windows XP, Windows 2003, or Windows Vista,

 500MHz computer with 256MB of RAM or higher, 500MB free hard disk space or higher

 

Operating Temperature: 65° to 90°F / 18° to 32°C

 

Supply Voltage:  100-240 VAC. 3.3A

 

Humidity: 20-80% non-condensing

 

Dimensions:

• HDP5000: 11.50"H x 12.25"W x 9.25"D / 292mmH x 313mmW x 235mmD

• HDP5000+Dual-Sided Module: 11.50"H x 25"W x 9.25"D / 292mmH x 445mmW x 235mmD

• HDP5000+Single-Sided Lam Module: 12.75"H x 25"W x 9.25"D / 324mmH x 635mmW x 235mmD